Olá Pessoal.
Instalei o iATKOS v7 ontem pela primeira vez.
Tudo ocorreu na medida do possível bem, apesar de fazer uma instalação limpa 3 vezes seguidas.
O video, som teclado e mouse ps2 estão funcionando corretamente.
Mais a rede, nem a wireless nem a wired estão funcionando.
Gostaria muito da ajuda de voces para resolver este problema, levando em consideração que ainda sou noob nesse "novo mundo".
Minha placa de rede é: Attansic L2 100 Mbit
E a wireless é: Realtek RTL-8185
Placa mãe: Asus P5LD2-X/1333
Bios: American Megatrends Inc. Versão: 0207 (04/15/2008)
Segue as configurações detalhadas casos voces caras precisem:
Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 02)
Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01)
SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller (rev 20)
Ethernet controller: Attansic Technology Corp. L2 100 Mbit Ethernet Adapter (rev a0)
VGA compatible controller: nVidia Corporation G72 [GeForce 7300 SE] (rev a1)
Outras informações sobre a Wireless
description: Wireless interface
product: RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id:
1
bus info:
pci@0000:01:01.0
logical name:
wmaster0
version: 20
serial: 00:06:4f:6a:a6:8a
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list logical ethernet physical wireless
configuration:
broadcast = yes
driver = rtl8180
ip = 192.168.1.20
latency = 64
maxlatency = 64
mingnt = 32
module = rtl8180
multicast = yes
wireless = IEEE 802.11bg
Outras informações sobre a Wired
description: Ethernet interface
product: L2 100 Mbit Ethernet Adapter
vendor: Attansic Technology Corp.
physical id:
0
bus info:
pci@0000:02:00.0
logical name:
eth0
version: a0
serial: 00:1f:c6:c4:b7:26
capacity: 100MB/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration:
autonegotiation = on
broadcast = yes
driver = atl2
driverversion = 2.0.4
firmware = L2
latency = 0
link = no
module = atl2
multicast = yes
port = twisted pair
Bom acho que é isso, caso precisem de mais informações me avisem.